What is a four-way shuttle?

Four-way shuttle car-is an intelligent robot that realizes “goods to people” sorting. Through programming to achieve tasks such as storage and transportation, it can be perfectly integrated with the logistics information system (WCS/WMS) to realize automatic identification, access and other functions. It uses advanced super capacitor power supply method, which greatly improves the equipment’s energy utilization rate.

The working principle and selection of solenoid valve

Solenoid valve is an automatic basic element used to control the direction of fluid, which belongs to the actuator; it is usually used in mechanical control and industrial valves to control the direction of the medium, so as to achieve the control of the valve switch.

What is a stacker and what is a shuttle in AS/RS

In this system, a shuttle car accesses the pallet in the shelf aisle, and the stacker transports the pallet to the cargo entrance and exit, which is sent out by the conveying equipment, and the forklift does not need to enter the storage area. 

Which industrial software is stuck dead by the United States

Why can Chinese rockets go to Air space, but the chip, software? Because the United States controls the foundation of manufacturing, this scene can be called a bottom draw. If it is said that in terms of chip production, domestic companies can still cope with some scenarios, but China is far behind in terms of software. The key point is that the software is actually the upstream of production, which means that the United States has not only stuck China’s neck but also given the head. 

Life calculation of linear system

When the linear system is actually used, the load calculation should be performed first. It is not easy to find the load in linear reciprocating motion by calculation, because there is vibration or shock during the movement, and the distribution of vibration or shock relative to the linear system must also be fully considered. In addition, the operating temperature will also have a great impact on life. Adding these conditions together, the above calculation formula becomes the following formula.

The Inevitable Trends in Manufacturing – Smart Factories You Don’t Know

Predictive maintenance helps schedule replacement of equipment parts before errors occur, and can reasonably schedule replacement times, such as during idle periods of the machine, without taking up production time. This not only ensures the efficiency of the production line, but also improves the overall agility of the plant.

How does semiconductors change the world?

From smartphones in your pockets to the huge data centers that “power” the Internet, from electric scooters to supersonic aircraft, from pacemakers to weather-forecast inglises , inside every device, invisible or little known, this tiny technology makes it possible, it’s called semiconductors.

How does the starter drive the car engine to “run”?

Sitting in the car, igniting the car, stepping on the accelerator and starting, this is how common we are. However, the process of how a car engine starts from standstill to run is probably not well understood by many people. The following moving pictures detail the process of the car from standstill to start. It is intuitive and obvious. After reading, it will definitely make you know more about the car!

N95 face mask machine design guide line

Fully automatic high-speed N95 mask production line, including automatic raw material delivery, automatic transportation, cutting nose bridge strips, welding forming, nose bridge filling, ear strap welding, folding, cutting and recycling, and other complete process automation to complete the entire production process from coil raw materials to mask finished products .

Product reliability design and analysis

We know that the reliability of a product is the ability of the product to perform a specified function under specified conditions and within a specified time. The probability of reliability is called the reliability of the product.