With the development of modern industry and increasingly fierce market competition, higher requirements will be put forward for the automated retrieve warehouse, and the stacker is the core component of the entire automated AS/RS warehouse. The stacker structure is mainly composed of the lower pole beam, the feeding platform, the shelf mechanism, the vertical pole beam, the upper pole beam, the horizontal traveling mechanism, the lifting mechanism, the electric control cabinet, the safety protection device and the electric control working system. Jujumi will introduce the following:
1. Main structure: The stacker structure is mainly composed of upper beam, column beam, lower beam and control support frame. The upper and lower beams are welded by steel plates and section steels into a box-shaped structural frame with good cross-sectional properties. The walking wheel axle holes on both sides of the lower rod beam are processed by a milling machine to form a one-time forming. Because the shafts are parallel, the smooth running of the entire machine is improved. The uprights are made of square steel pipes, and the processing steps are like this.
Weld two flat rails on both sides of the square steel pipe. The surface of the guide rail is hardened and has good wear resistance. The welding adopts special equipment automatic welding technology, which can avoid the deformation and dislocation of the overall structure; the upper beam is welded to the upright column, and the upright column and the lower beam are positioned by flanges and reinforced by high-strength screws. Finally, the whole main structure is light in weight, resistant to twisting, bending, high rigidity and high strength.
2. Freight platform: The freight platform is a connecting component that moves up and down by the power of the lifting mechanism. It is an L-shaped structure welded by a vertical frame and a horizontal frame. The vertical frame is used to install lifting guide wheels and some safety protection devices. equipment. The horizontal frame is made of seamless steel pipes, which can fully meet the requirements of commodities.
3. Horizontal traveling mechanism: The horizontal traveling mechanism is composed of a power driving device and a roller group, which is used to operate the entire equipment in the direction of the road.
4. Lifting mechanism: The lifting mechanism is composed of a drive motor, a reel, a sliding group and a steel wire rope, which is used to lift the load platform to move it vertically.
