Tensile Stress
Compute tensile stress σ from axial force F and area A.
Inputs
Formula
σ = F/A
Above yield the material turns plastic.
Fundamentals
Compute tensile stress σ from axial force F and area A.
This tool computes Tensile Stress from the formula: σ = F/A
History
Design theory of gears, threads and bearings matured with machine tools and standardisation (AGMA, ISO) since the Industrial Revolution.
Engineering applications
Used for transmission design, joint strength checks and component selection.
Glossary
| Force F | Input parameter |
| Area A | Input parameter |
| Tensile stress σ | Output result |
How to use
- Fill in Force F, Area A in the Inputs section (watch the unit on each field).
- Click Calculate; the tool evaluates the formula shown above.
- Read Tensile stress σ in the results area.
Formula · Worked Example · Knowledge
Formula
核心计算关系：σ = F/A
输入变量：
- Force F
F— N - Area A
A— mm²
输出结果：
- Tensile stress σ
sigma— MPa
假设/适用：Gearing/thread formulas assume standard, zero-backlash mounting; include error & load factors K_A.
Worked Example
根据公式 σ = F/A，取 Force F = 10,000 N；Area A = 100 mm²。
代入计算得：Tensile stress σ = 100 MPa。
Key Points
- Gearing/thread formulas assume standard, zero-backlash mounting; include error & load factors K_A.
- Compare stress with allowable stress and keep a safety factor (≥1.5, ≥2 for critical parts).
- For high speed/load also check lubrication, heat and fatigue life, not just static strength.
Parameters
Inputs
| Parameter | Symbol | Unit | Default |
|---|---|---|---|
| Force F (N) | F | N | 10000 |
| Area A (mm²) | A | mm² | 100 |
Outputs
| Result | Symbol | Unit |
|---|---|---|
| Tensile stress σ | sigma | MPa |
Applications
- Common engineering use cases
FAQ
What formula does this tool use?
This tool computes per ISO / AGMA / ASME standard formulas: σ = F/A
How accurate are the results?
Results match input precision, based on SI units and common engineering approximations; for critical duty re-check with a safety factor.
Where is it used?
Common engineering use cases