Specific Volume Converter
Instantly convert Specific Volume between SI and common engineering units including m³/kg, L/kg, cm³/g, ft³/lb. No formula lookup required.
Convert
About
Fundamentals
Specific Volume is a basic physical quantity for measuring the relevant object; unit conversion unifies dimensions across standards, drawings and test data.
This tool uses m³/kg as the base unit and scales the input by each unit's factor to the target; temperature and similar quantities use affine conversion $y=a x+b$. All factors are relative to SI.
History
Measurement of Specific Volume has a long history: ancient standards used body parts (cubit, foot) or nature (sundials, water clocks); the metric system (1790s) and SI (1960) unified global measurement.
Engineering applications
In mechanical design, trade, international drawings and test data, Specific Volume must often be converted between customary units such as m³/kg and SI to keep dimensions consistent.
Glossary
| Base unit | Reference unit, usually SI (e.g. m³/kg). |
| Conversion factor | Proportional factor between a unit and the base. |
| Linear / affine | Most units are linear; temperature needs an offset (affine). |
How to use
- Enter the value to convert in the Value box.
- Pick the source and target units from the From / To dropdowns.
- Click Convert; the result shows below. Use ⇅ to swap units.
Formula · Worked Example · Knowledge
Formula
Worked Example
Key Points
- Covers 5 common units with bidirectional conversion and unit swap.
- Engineering-significant figures; scientific notation for extreme values.
- Unifies dimensions across standards, test data and reports.
Parameters
Supported units
| Unit | Base factor |
|---|---|
| m³/kg | |
| L/kg | |
| cm³/g | |
| ft³/lb | |
| US gal/lb |
Applications
- Flow, viscosity, concentration units
- Chemical recipe scaling
- Process-control unit mapping